BCM270X_DT: Enable UART0 on CM3

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

diff --git a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
index 41874c25a84226c0e4af92ec4059e0a571fe6123..3ba6e621856c288ae4694f758604619f59064fdb 100644 (file)
--- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
@@ -6,6 +6,10 @@
        model = "Raspberry Pi Compute Module 3";
 };
 
+&uart0 {
+       status = "okay";
+};
+
 &gpio {
        sdhost_pins: sdhost_pins {
                brcm,pins = <48 49 50 51 52 53>;